Accord L4-2.4L (2005)
![background image](/honda/accord/l4-2.4l/Page-2702007.png)
15. Set the rear window in the opening, and center it. Make alignment marks (A) across the rear window and body with a grease pencil at the four
points shown. Make sure both upper clips (B) are in the body holes. Be careful not to touch the rear window where adhesive will be applied.
16. 2-door: Make alignment marks (C) to the rear window with a grease pencil as shown where the molding will be installed.
17. Remove the rear window.