Accord L4-2156cc 2.2L SOHC (1991)
3.
Disconnect the coaxial cable from the antenna jack.
4.
Measure the resistance between the top section of the antenna and the center pin of the antenna jack.
^
If the resistance is less than 10 ohms, go to Coaxial Cable Test.
^
If the resistance is more than 10 ohms, continue with step 5.
5.
Remove the antenna mast nut with the special tool; then, remove the antenna mast.
6.
Measure the resistance between the center pin of the antenna jack and the threaded portion of the antenna tube.
^
If the resistance is less than 10 ohms, go to CORRECTIVE ACTION, Antenna Mast Replacement.
^
If the resistance is more than 10 ohms, go to CORRECTIVE ACTION, Antenna Tube Replacement.
Diagnosis 2. Electrical Noise or Interference
1.
Disconnect the coaxial cable from the antenna jack.