Accord L4-2156cc 2.2L SOHC (1991)
1. Carefully direct the teeth of the mast antenna drive cable as shown, and insert the drive cable into the antenna housing.
2. Check for engagement of the cable teeth to the drive gear by carefully moving the cable up and down
3. Turn the radio switch "OFF", and let the motor pull the drive cable inside the antenna housing.
4. Clean the mast antenna housing threads and insert the mast antenna into the antenna housing, and in- stall the bushing and spacer, tighten the
special nut. 2.3 N.m (0.23 kg-m, 20 lb-in)
5. Check that the mast antenna extends and retracts fully when the radio switch is turned ON and OFF repeatedly. If you overtightened the nut, the
antenna may stick. If sticking occurs, back the nut off a little, then raise and lower the antenna again. Repeat until the antenna moves freely.
