Accord L4-2156cc 2.2L SOHC (1991)
Roller Removal From 4-way Valve
10. Remove the rollers from the 4-way valve by pushing the valve out one side of the valve body, and then the other.
NOTE: When removing the rollers. hold the plungers with your fingers to keep them from popping out.
11. Remove the plungers, return springs and 4-way valve from the valve body.
12. Remove the 11 mm O-ring from the 4-way valve.
Plunger Inspection
13. Check the plungers.
^ Inspect their surface for scoring or scratches.
^ Slip each plunger into the valve body, and make sure it slides smoothly, without drag or side play. If any plunger is damaged, replace it.
Checking The 4-way Valve
14. Check the 4-way valve.
^ Inspect its surface for scoring or scratches.
^ Slip it into the valve body, and make sure it slides smoothly, without drag or side play.
NOTE: If the valve body is damaged, replace the valve body unit (valve body, pressure control valve, gain control valve, control valve) as an assembly.
