Accord V6-3.0L Hybrid (2005)
Front Bumper: Description and Operation
Door and Bumper Reinforcement Beams
Door and bumper reinforcement beams used on Honda vehicles are made from a metal equivalent of high strength steel.
If high strength steel is heated, the strength of the steel will be reduced. If high strength steel is damaged, as in a vehicle accident, where the door and
bumper reinforcement beams are bent, the beams may crack if an attempt is made to straighten them.
Front and rear bumper reinforcement beams are made with aluminum alloy.
For this reason, door and bumper reinforcement beams should NEVER be repaired; they should be replaced if they are damaged.
NOTE: If a door beam is damaged, the whole door panel assembly should be replaced.