Accord V6-3.0L Hybrid (2005)
Battery, Hybrid Drive: Service and Repair
Battery Module Removal/Installation
NOTE: Put on gloves to, protect your hands from electrical shock. IMA components are located in this area. The IMA is a high-voltage system. You
must be familiar with the IMA system before working on or around it. Make sure you have read the IMA service precaution before doing repairs or
service.
1. Disconnect the negative cable to the 12 V battery.
2. Remove the IPU lid.
3. Remove the high voltage cables (A), then wrap them with insulating tape (B).
4. Disconnect the MCM connector (C), and battery module connector (D).
5. Remove the spare tire lid and the trunk front trim panel.
6. Remove the caps (A) and nuts (B).
