Accord V6-3.0L Hybrid (2005)
11. At idle stop switch side, check for continuity between idle stop switch 2P connectors No.1 and No.2.
Is there continuity?
YES - Go to step 12.
NO - Replace the idle stop switch.
12. Check the No.18 ACG (15 A) fuse in under-dash fuse/relay box.
Is the fuse blown?
YES -
-
Repair short in the wire between the idle stop switch and the No.18 ACG (15 A) fuse. Also replace the No.18 ACG (15 A) fuse.
-
Repair short in the wire between the PCM (E9) and the idle brake switch. Also replace the No.18 ACG (15 A) fuse.
NO - Go to step 13.
13. Turn the ignition switch ON (II).
14. Measure voltage between idle stop switch 2P connector terminal No.1 and body ground.
Is there battery voltage?
YES - Go to step 15.
NO - Repair open in the wire between the idle stop switch and the No.18 ACG (15 A) fuse.
15. Turn the ignition switch OFF.