Accord V6-3.0L Hybrid (2005)
Fluid Pressure Sensor/Switch: Service and Repair
3RD Clutch Pressure Switch Replacement
3rd Clutch Transmission Fluid Pressure Switch Replacement
1. Disconnect the connectors from the transmission range switch (A), the output shaft (countershaft) speed sensor (B), the input shaft (mainshaft)
speed sensor (C), and the 3rd clutch transmission fluid pressure switch (D).
2. Remove the 3rd clutch transmission fluid pressure switch.
3. Make sure there is no water, oil, dust, or foreign particles inside the connector.
4. Install the new 3rd clutch transmission fluid pressure switch and a new sealing washer (E), and tighten the switch.
5. Connect the connectors securely.
