Accord V6-3.5L (2010)
Front Seat Cushion Cover Replacement (4-Door)
Front Seat Cushion Cover Replacement
Special Tools Required
-
KTC Trim Tool Set SOJATP2014
*
4-door
SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations/SRS Component
Location Index (4-Door) and the precautions and procedures See: Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and
Disarming/Service and Repair before doing repairs or service.
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to tear or damage the seat covers.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Driver's seat is shown; passenger's seat is similar.
1. Remove the front seat See: Service and Repair/Front Seat Removal/Installation.
2. Driver's seat/passenger's seat (4-way power seat): Remove the screw, and release the hooks (A), the tabs (B), and the pin (C), then remove the
front cover (D).