Accord V6-3.5L (2010)
38. Check for continuity between body ground and PGM-FI main relay 1 4P connector terminals No. 1 and No. 4 individually.
Is there continuity?
YES -
Replace the under-hood fuse/relay box See: Maintenance/Fuses and Circuit Breakers/Fuse Block/Service and Repair/Under-Hood Fuse/Relay Box
Removal/Installation. Also replace the No. 17 FI MAIN(15 A)fuse.
NO -
Go to step 39.
39. While disconnecting each of the parts or connectors below, one at a time, check for continuity between PGM-FI main relay 1 4P connector
terminal No. 2 and body ground:
-
PGM-FI main relay 2 (FUEL PUMP)
-
ECM/PCM connector B (49P)
-
Each injector 2P connector
-
Camshaft position (CMP) sensor 3P connector
-
Crankshaft position (CKP) sensor 3P connector
-
MAF sensor/IAT sensor 5P connector
-
Electronic throttle control system (ETCS) control relay
