Accord V6-3.5L (2010)
Did the damper pinch bolt turn more than 45 degrees when you torqued it?
Yes - Go to step 9.
No - Go to step 10.
9. Replace any loose pinch bolts, and torque them to 211 N.m (156 lb-ft).
10. Reinstall the front wheels, and torque the wheel nuts to 127 N.m (94 lb-ft).
11. If any damper pinch bolts were replaced, check the wheel alignment, and adjust if necessary.
12. Center-punch a completion mark above the third character of the engine compartment VIN.