Accord V6-3.5L (2010)
11. Remove the nuts securing the shift cable bracket (E).
12. Raise the vehicle on a lift, or apply parking brake, block both rear wheels, and raise the front of the vehicle. Make sure it is securely supported.
13. Remove the front splash shield.
14. Remove the heat shield.
15. Remove the bolt securing the shift cable bracket (A).
16. Remove the shift cable grommet (B), and pull out the shift cable (C).
17. Insert a new shift cable through the grommet hole (D), and install the grommet in its hole. Do not bend the shift cable excessively.
18. Secure the shift cable bracket with the bolt.
