Accord Coupe L4-2.2L SOHC VTEC (1995)
Caliper Removal
3. Remove caliper bracket mounting bolts and hang the caliper assembly to one side.
4. Clean dirt and grease off ball joints, remove cotter pins from ball joint nuts.
CAUTION:Do not damage the ball joint boots.
Tie-rod Ball Joint Removal
Upper Ball Joint Removal
5. Install a 10mm hex nut on the tie-rod ball joint. Be sure hex nut is flush with ball joint pin end to prevent damage to the threaded end of ball joint.
6. Insert jaws carefully, making sure you do not damage ball joint boot. Separate ball joint and steering knuckle. Remove nut from joint pin end.
NOTE:If necessary, apply penetrating type lubricant to loosen the ball joint.
7. Using same tool and above procedure, remove upper ball joint from steering knuckle. (See above image).
