Accord DX Sedan L4-2254cc 2.3L SOHC MFI (2001)
Front Door Panel: Service and Repair
Front Door Panel Removal/Installation - Sedan
Special Tools Required
Trim Pad Remover, Snap-on A177A or equivalent, commercially available.
1. Remove the mirror mount cover, power mirror, manual mirror. Take care not to scratch the door panel.
2. If applicable, remove the regulator handle (A) by pulling the clip (B) out with a wire hook (C).
3. Remove the inner handle (A). Take care not to scratch the door panel.
-1 Pry out the cap (B), and remove the screw.
-2 Pull the inner handle forward and out half-way.
-3 Disconnect the inner handle rod (C) and power door lock switch connector (D) (for some models).