Accord EX Coupe L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
11. Measure the inner diameters of the bearings for the front balancer shaft (A) and the rear balancer shaft (B).
Bearing Inner Diameter
Standard (New):
No.1 journal:
Front (C): 42.800 - 42.820 mm (1.6850 - 1.6858 inch)
Rear (D): 21.000 - 21.013 mm (0.8268 - 0.8273 inch)
No.2 journals front (E) and rear (F): 38.800 - 38.820 mm (1.5276 - 1.5283 inch)
No.3 journals front (G) and rear (H): 34.800 - 34.820 mm (1.3701 - 1.3709 inch)
Service Limit:
No.1 journal:
Front (C): 42.83 mm (1.686 inch)
Rear (D): 21.02 mm (0.828 inch)
No. 2 journals front (E) and rear (F): 38.83 mm (1.529 inch)
No.3 journals front (G) and rear (H): 34.83 mm (1.371 inch)
12. Calculate the shaft-to-bearings oil clearances.
BEARING I.D.-JOURNAL 0.D.= 0IL CLEARANCE
Shaft-to-Bearings Oil Clearances
Standard (New):
No.1 front journal, No.3 front and rear journals: 0.066 - 0.098 mm (0.0026 - 0.0039 inch)
No.2 front and rear journals: 0.076 - 0.108 mm (0.0030 - 0.0043 inch)
No.1 rear journal: 0.050 - 0.075 mm (0.0020 - 0.0030 inch)
Service Limit:
No.1 front journal, No.3 front and rear journals: 0.12 mm (0.005 inch)
No.2 front and rear journals: 0.13 mm (0.005 inch)
No.1 rear journal: 0.09 mm (0.004 inch)