honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Trunk/Liftgate Sensor/Switch (For Alarm) > < Security Lamp/Indicator|Locations|Page 6514
Page 1
background image

Security Lamp/Indicator: Testing and Inspection

Security Indicator Test

1. Remove the driver's door panel.

2. Disconnect the 2P connector from the security indicator.
3. The LED should come on when power is connected the No.2 terminal and ground is connected to the No.1 terminal.
4. If the LED does not come on, replace it.

Trunk/Liftgate Sensor/Switch (For Alarm) > < Security Lamp/Indicator|Locations|Page 6514