Accord EX Coupe V6-3.0L (2001)
![background image](/honda/accord_ex_coupe/v6-3.0l/Page-537002.png)
5. Install the rings as shown. The top ring (A) has a 1B and the second ring (B) is marked 2B. The manufacturing marks (C) must be facing upward.
6. After installing a new set of rings, measure the ring-to-groove clearance:
Top Ring Clearance
Standard (New): 0.035-0.060 mm (0.0014-0.0024 inch)
Service Limit: 0.13 mm (0.005 inch)
Second Ring Clearance
Standard (New): 0.030-0.055 mm (0.0012-0.0022 inch)
Service Limit: 0.13 mm (0.005 inch)
7. Rotate the rings in their grooves to make sure they do not bind.