Accord EX Coupe V6-3.0L (2001)
6. Clamp the auto-tensioner (A) by using 2 bolts (6 mm diameter) (B) and vise (C) in a vise as shown. Do not clamp the auto-tensioner itself.
7. Attach a torque wrench (A) to the pulley bolt. Measure the torque when the tensioner is turned counterclockwise. If the torque is less than
specified value, replace the auto tensioner.
8. If necessary, remove the pulley bolt (A) (left-hand threads), and replace the tensioner pulley (B).