honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Climate Control|Page 5833 > < Climate Control
Page 2
background image

9. Measure the voltage between the No.2 terminal of the climate control unit 20P connector and body ground.

Is there about 5 volts?

YES - Check for loose wires or poor connections at the climate control unit 20P connector and at the A/C pressure switch 2P connector. If the
connections are good, substitute a known-good climate control unit, and recheck. If the symptom/ indication goes away, replace the original
climate control unit.

NO - Repair open in the wire between the climate control unit and the A/C pressure switch.

10. Using a Backprobe Set, measure the voltage between the No.27 terminal of the PCM connector A (32P) and body ground with the PCM

connectors connected.

Is there about 5 volts?

YES - Repair open in the wire between the PCM and the A/C pressure switch.

NO - Check for loose wires or poor connections at the PCM connector A (32P). If the connections are good, substitute a known-good PCM, and
recheck. If the symptom/indication goes away, replace the original PCM.

11. Check for proper A/C system pressure.

Is the pressure within specifications?

YES - Replace the A/C pressure switch.

NO - Repair the A/C pressure problem.

Climate Control|Page 5833 > < Climate Control