Accord EX Coupe V6-3.0L (2001)
Exterior Lighting Module: Testing and Inspection
1. Before testing exterior light control functions, troubleshoot the multiplex control system.
Multiplex Control Unit, Driver's:
2. Remove the driver's unit from the driver's under-dash fuse/relay box.
3. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 4.
4. Make these input tests at the connector or fuse/relay box socket.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 5.
Multiplex Control Unit, Door:
5. Remove the driver's door panel, and disconnect the 20P connector from the door unit.