Accord EX Coupe V6-3.0L (2001)
4.
Use a small, flat-tip screwdriver to pry out the retainer from the connector. Also, pry out the retainer from the new 3P connector.
5.
Remove the No. 1 terminal (YEL/RED wire) from the old 3P connector.
6.
Insert the No. 1 terminal (YEL/RED wire) into the left (No. 1) cavity of the new 3P connector.
7.
Repeat steps 5 and 6 to transfer the No. 2 terminal (GRN/WHT wire) to the center (No. 2) cavity of the new 3P connector. Repeat steps 5 and 6 to
transfer the No. 3 terminal (RED/GRN wire) to the right (No. 3) cavity of the new 3P connector. Discard the old 3P connector.