Accord EX Coupe V6-3.0L (2001)
1996-97 Civic DX, LX
Failed Part:
P/N 37830-PAA-500
H/C 5430319
Defect Code:
81400
Symptom Code:
K4900
Skill Level:
Repair Technician
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.
DIAGNOSIS
*1.
Connect the Honda Diagnostic System (HDS) with version 1.012.023 or later software to the 16P data link connector (DLC).*
2.
Turn the ignition switch to ON (II). Turn on the HDS.
3.
At the screen prompts, enter the VIN and the odometer reading, and then verify the correct date and time.
4.
From the System Selection Menu screen, select PGM FI.
5.
From the Mode Menu screen, select DTCs/Freeze Data.
6.
Enter the repair order number when prompted, then read the screen.
Is DTC P0107 or P0108 set?
Yes - Go to step 7.
No - Go to step 8.
7.
Press the freeze data (camera film strip) icon on the right side of the screen. Look at the IAT SENSOR value.
Is the IAT value at or below 32°F (0°) (4.0 volts)? Yes - Press the red DTC icon on the right side of the screen to clear the DTC. Turn the ignition
switch to LOCK (0), and then turn off and disconnect the HDS. Go to the appropriate *REPAIR PROCEDURE.*
*
No - Continue with normal troubleshooting.*
8.
Find out from your customer the approximate ambient air temperature when the problem happened.
Was the ambient air temperature at or below 32°F
(0°C) when the problem happened?
Yes - Go to the appropriate REPAIR
*
PROCEDURE.*
*
No - Continue with normal troubleshooting.*
*REPAIR PROCEDURE - ACCORD V6, ODYSSEY*
NOTE: