Accord EX Coupe V6-3.0L (2001)
9. Reconnect the passenger's multiplex control unit to the passenger S under-dash fuse/relay box, and perform the following input tests at the
appropriate connectors on the passenger's under-dash fuse/relay box (see connector views page 22-218). For passenger's under-dash fuse/relay box
connector socket location.
NOTE: All passenger lock knobs must be in the locked position, then unlocked and locked one at a time, or the test results will not be correct.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 10.
Multiplex Control Unit, Door:
10. Remove the driver's multiplex control door unit, and disconnect its connector.
11. Inspect all the connector and socket terminals to be sure they are making good contact.