honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Alternator/Compressor Belt|Page 4748 > < Alternator/Compressor Belt|Page 4746
Page 2
background image

13. Check for continuity between body ground and ECM/PCM connector terminal C5.

Is there continuity?

YES - Troubleshoot the charging circuit.

NO - Repair open in the wire between the ECM/PCM (C5) and the alternator.

14. Turn the ignition switch OFF.
15. Disconnect the negative cable from the battery.
16. Disconnect ECM/PCM connector C (31P).

17. Check for continuity between body ground and ECM/PCM connector terminal C5.

Is there continuity?

YES - Repair short in the wire between the ECM/PCM (C5) and the alternator.

NO - Substitute a known-good ECM/PCM and recheck. If the prescribed voltage is now available, replace the original ECM/PCM. 

Alternator/Compressor Belt|Page 4748 > < Alternator/Compressor Belt|Page 4746