Accord EX Coupe V6-3.0L (2001)
![background image](/honda/accord_ex_coupe/v6-3.0l/Page-1571006.png)
30. Coat the flow control valve (A) with power steering fluid, then install it and the spring (B) in the pump housing.
31. Coat the new O-ring (D) with power steering fluid, and install it on the flow control valve cap (E). Install the cap on the pump housing, and tighten
it.
32. Install the pulley (A), then loosely install the pulley nut (B). Hold the steering pump in a vise with soft jaws. Be careful not to damage the pump
housing with the jaws of the vise.
33. Hold the pulley (A) with the special tool, and tighten the pulley nut (B).
34. Check that the pump turns smoothly by turning the pulley by hand.