Accord EX Coupe V6-3.0L (2001)
25. Coat the piston seal ring (A) and the inside of the special tool with power steering fluid, then carefully slide the tool onto the rack and over the
piston seal ring.
26. Move the special tool back and forth several times to make the piston seal ring fit snugly in the piston.
27. Wrap vinyl tape around the rack teeth and rack end edges, then coat the surface of the tape with power steering fluid. Make sure that the vinyl tape
is wrapped carefully so that there is no stepped portion.
28. Coat the inside surface of the new cylinder end seal (A) with power steering fluid, then install it onto the steering rack with its grooved side toward
the piston. When installing the cylinder end seal, be careful not damage the lip of the seal with the edges or teeth of the steering rack.
29. Remove the vinyl tape from the steering rack, then remove any adhesive residue.