Accord EX Coupe V6-3.0L (2001)
46. Apply multipurpose grease to the sliding surface of the rack guide (A), and install it onto the gearbox housing.
47. Apply new sealant all the way around the first three threads of the rack guide screw (B), then install the spring (C), rack guide screw, and locknut
(D).
48. Adjust the rack guide screw. After adjusting, check that the rack moves smoothly by sliding it right and left.
49. Install the stop washer (A) with the chamfered side facing out, and screw each rack end (B) into the rack while holding the lock washer (C) so its
tabs (D) are in the slots (E) in the end of the rack.
50. Hold the flat surface sections of the right side steering rack with a wrench, and tighten both rack ends. Be careful not to damage the rack surface
with the wrench.
51. Bend the lock washer back against the flat spots on the rack end joint housing.
52. Apply multipurpose grease (A) to the circumference of the rack end joint housing.