Accord EX Coupe V6-3.0L (2001)
Steering Wheel: Service and Repair
Removal and Installation
Removal
SRS components are located in this area. Review the SRS component locations, precautions, and procedures in Restraint Systems before performing
repairs or service.
1. Align the front wheels straight ahead, then remove the driver's airbag from the steering wheel.
2. Disconnect the radio remote switches connector and cruise control switches connector if equipped.
3. Loosen the steering wheel bolt (A), then install a steering wheel puller (B) on the steering wheel and remove it.
Note these items when removing the steering wheel:
-
Do not tap on the steering wheel or the steering column shaft when removing the steering wheel.
-
If you thread the puller bolts (C) into the wheel hub more than five threads, the bolts will hit the cable reel and damage it. To prevent this,
install a pair of jam nuts five threads up on each puller bolt.
Installation