Accord EX Coupe V6-3.0L (2001)
![background image](/honda/accord_ex_coupe/v6-3.0l/Page-1234001.png)
Shift Cable: Service and Repair
Replacement
1. Raise the front of the vehicle, and make sure it is securely supported.
2. Set the parking brake, and block rear wheels securely.
3. Shift the transmission into R position.
4. Remove the center console.
5. Remove the nut securing the shift cable end (A), then separate the shift cable end from the shift lever assembly.
6. Rotate the socket holder (A) on the shift cable (B) counterclockwise a quarter turn, then slide the holder to remove the shift cable from the shift
lever bracket base (C).
NOTE: Do not remove the shift cable by twisting the shift cable guide pipe (D).
7. Remove the floor heat shield.
8. Remove the shift cable guide bracket (A) and grommet (B).