Accord EX Coupe V6-3.0L (2001)
![background image](/honda/accord_ex_coupe/v6-3.0l/Page-2531004.png)
12. With the door multiplex control unit still disconnected, make these input tests at the connectors.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input test prove OK, go to step 13.
13. Reconnect the door multiplex control unit and perform the following input test.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 14.
14. If all the input tests prove OK, one of the control units must be faulty. Substitute a known-good control unit for the one that is most likely at fault,
then check the system. If the system works properly, the original control unit is faulty; replace it. If there is still a malfunction, substitute a
known-good control unit for the next most likely unit to be at fault, and recheck. If the system works properly, the original unit is faulty; replace it.