Accord EX Coupe V6-3.0L (2001)
5. Disconnect the rear window defogger connectors (A).
6. Remove the molding (A) from the edge of the rear window (B). If necessary, cut the molding with a utility knife.
7. Pull down the rear portion of the headliner. Take care not to bend the headliner excessively, or you may crease or break it.
8. Apply protective tape (A) along the inside and outside edges of the body as shown. Using an awl, make a hole through the adhesive (B) from
inside the vehicle. Push a piece of piano wire (C) through the hole, and wrap each end around a piece of wood.