Accord EX Coupe V6-3.0L (2001)
21. With a sponge, apply a light coat of glass primer along the edge of the rear window (A) and molding (B) as shown, then lightly wipe it off with
gauze or cheesecloth:
-
Do not apply body primer to the rear window, and do not get body and glass primer sponges mixed up.
-
Never touch the primed surfaces with your hands. If you do, the adhesive may not bond to the rear window properly, causing a leak after the
rear window is installed.
-
Keep water, dust, and abrasive materials away from the primed surface.
22. With a sponge, apply a light coat of body primer to the original adhesive remaining around the rear window opening flange. Let the body primer
dry for at least 10 minutes:
-
Do not apply glass primer to the body, and be careful not to mix up glass and body primer sponges.
-
Never touch the primed surfaces with your hands.
23. Throughly mix the adhesive and hardener together on a clean glass or metal plate with a putty knife. Follow the instructions that came with the
adhesive.