Accord EX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-2397001.png)
Air Bag: Service and Repair
Driver Airbag Replacement
REMOVAL
1. Disconnect the battery negative cable and wait at least three minutes before beginning work.
2. Remove the access panel (A) from the steering wheel, then disconnect the connector between the cable reel 2P connector (B) and driver's airbag
2P connector (C).
3. Remove the covers (A, B) from the steering wheel, then remove the two Torx bolts (C) using a Torx T30 bit. Then remove the driver's airbag (D).
4. Disconnect the horn connector from the steering wheel.
INSTALLATION
