Accord EX Sedan V6-2706cc 2.7L SOHC MFI (1997)
6. If you can feel a ridge of metal or hard carbon around the top of any cylinder, remove it with a ridge reamer. Follow reamer manufacturer's
instructions.
CAUTION: If the ridge is not removed, it may damage the pistons as they are pushed out.
7. Remove the bearing cap bridge.
^
Remove the connecting rod caps after setting the crank pin at Bottom Dead Center (BDC) for each cylinder. Remove the piston assembly by
pushing on the connecting rod.
CAUTION: Take care not to damage the crank pin or cylinder with the connecting rod.
