Accord EX Sedan V6-2706cc 2.7L SOHC MFI (1997)
Windshield Washer Reservoir: Service and Repair
Wipers/Washer - Washer Replacement
1. Remove the inner fender.
2. Remove the washer filler neck.
3. Disconnect the hose and the 2P connector from the washer motor.
4. Remove the washer reservoir by removing the mounting bolts.
5. Remove the washer motor from the washer reservoir.
6. Remove the washer nozzles and washer hose.
NOTE:
^ Take care not to pinch the hoses during reinstallation.
^ Install the grommets firmly.
^ After installation, adjust the aim of the washer nozzles.
