Accord LX Coupe L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
Rear Door Panel: Service and Repair
Special Tools Required
Trim Pad Remover, Snap-on # A177 or equivalent, commercially available.
1. If applicable, remove the regulator handle (A) by pulling the clip (B) out with a wire hook (C).
2. Remove the inner handle (A). Take care not to scratch the door panel.
-1 Pry out the cap (B), and remove the screw.
-2 Move the inner handle forward and half-way out, then disconnect the inner handle rod (C).
3. Power window models: Remove the pull pocket panel (A). Take care not to scratch the door panel.
-1 Pry out the cap (B), and remove the screw.
-2 Release the hooks (C), and disconnect the power window switch connector (D).