Accord LX Sedan L4-2156cc 2.2L SOHC MFI (1997)
7. If camshaft-to-holder oil clearance is out of tolerance:
^
And the camshaft has already been replaced, you must replace the cylinder head.
^
If camshaft has not been replaced, first check total runout with the camshaft supported on V-blocks.
^
Camshaft Total Runout:
-
Standard (New): 0.03 mm (0.001 inch) max.
-
Service Limit: 0.04 mm (0.002 inch)
^
If the total runout of the camshaft is within tolerance, replace the cylinder head.
^
If the total runout is out of tolerance, replace the camshaft and recheck. If the oil clearance is still out of tolerance, replace the cylinder
head.
8. Measure cam lobe height.