honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Air Mix Control|Page 7345 > < A/C Switch & Fan Switch|Page 7342
Page 1
background image

Heater Control Panel: Service and Repair
Air Mix Control

Heater Control Panel - Overhaul

Air Mix Control Cable Replacement

1.  Remove the self-tapping screw and clamp.
2.  Lift the end of the temperature control lever up, then remove the air mix control cable.

Heater Control Panel - Overhaul

3.  Install in the reverse order of removal. Make note of the following items.

^  Be sure the end of the cable housing is against the top before tightening the cable clamp.
^  After assembly, check that the temperature control lever slides smoothly through the full stroke from right to left.

Air Mix Control|Page 7345 > < A/C Switch & Fan Switch|Page 7342