Accord LX Sedan L4-2156cc 2.2L SOHC MFI (1997)
Synchronizer Ring: Testing and Inspection
SYNCHRO RING, GEAR INSPECTION
1. Inspect the synchro ring and gear.
A: Inspect the inside of the synchro ring for wear.
B: Inspect the synchro sleeve teeth and matching teeth on the synchro ring for wear (rounded off).
C: Inspect the synchro sleeve teeth and matching teeth on the gear for wear (rounded off).
D: Inspect the gear hub thrust surface for wear.
E: Inspect the cone surface for wear and roughness.
F: Inspect the teeth on all gears for uneven wear, scoring, galling, and cracks.
2. Coat the cone surface of the gear with oil, and place the synchro ring on the matching gear. Rotate the ring, making sure that it does not slip.
Measure the clearance between the synchro ring and gear all the way around.