Accord LX Sedan L4-2156cc 2.2L SOHC MFI (1997)
Mainshaft: Service and Repair
MAINSHAFT, COUNTERSHAFT REMOVAL
1. Remove transaxle from car. See: Service and Repair
2. Remove transmission housing. See: Transmission Housing/Service and Repair
3. Remove reverse idler gear shaft. See: Reverse Gear Shaft
4. Remove the mainshaft and countershaft assemblies with the shin forks from the clutch housing.
NOTE: Tape the mainshaft splines before removing the mainshaft and countershaft assemblies.
NOTE: The 3rd/4th, and 5th synchro hubs, and the ball bearing are installed with a press. Prior to reassembling, clean all the parts in solvent, dry
them, and apply lubricant to any contact surfaces. The 3rd/4th and 5th synchro hubs, however, should be installed with a press before lubricating
them.
MAINSHAFT ASSEMBLY CLEARANCE INSPECTION
NOTE: If replacement is required, always replace the synchro sleeve and hub as a set.
1. Support the bearing inner race with a socket, and push down on the mainshaft.