Accord LX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
Seat Latch: Service and Repair
Rear Seat-Back Latch and Lock Cylinder
NOTE:
-
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
-
Take care not to bend or scratch the interior trim.
1. Remove these items:
-
Rear seat-backs and rear seat cushion
2. Remove these items:
-
Rear bulkhead cover
-
Center anchor bolt of the center belt
-
Center belt lid
-
High mount brake light
-
Lock cylinder trim
-
Rear shelf
3. Remove these items:
-
Door sill trim (both sides) and rear side trim panel
4. Disconnect the cylinder rods (A) from the seat-back latch (B) on both sides.
5. Remove the bolts (C), then remove the seat-back latch.
6. Remove the screws (D), then remove the seat-back lock cylinder (E) and cylinder rods.
7. Install in the reverse order of removal, and note these items:
-
Make sure the cylinder rods are securely connected.
-
Make sure the seat-backs open properly.