Accord LX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
Turn Signal Flasher: Testing and Inspection
Turn Signal/Hazard Relay Input Testv
1. Remove the turn signal/hazard relay (A) from the driver's under-dash fuse/relay box (B).
2. Inspect the relay and fuse/relay box socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose, or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 3.
3. Make these input tests at the fuse/relay box.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, the turn signal/hazard relay must be faulty; replace it.