Accord LX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
![background image](/honda/accord_lx_sedan/l4-2254cc_2.3l_sohc_(vtec)_mfi/Page-1324004.png)
13.
Reinstall the intake manifold with the original gasket. Be careful not to pinch the new PCV hose. Torque the bolts and nuts to 22 Nm (16 lb-ft)
sequentially in two or three steps as shown.
14.
Reinstall the throttle body onto the intake manifold with a new throttle body gasket. Torque the nuts and bolts to 22 Nm (16 lb-ft).
15.
Reinstall the components removed in step 1.
16.
Connect a PGM Tester with SN 900 (or higher) software, and clear any stored DTCs. Make sure the MIL has gone off and stays off.
17.
Center-punch a completion mark above the second character (H) of the engine compartment VIN.
Disclaimer