Accord LX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
13.
Reinstall the intake manifold with the original gasket. Be careful not to pinch the new PCV hose. Torque the bolts and nuts to 22 Nm (16 lb-ft)
sequentially in two or three steps as shown.
14.
Reinstall the throttle body onto the intake manifold with a new throttle body gasket. Torque the nuts and bolts to 22 Nm (16 lb-ft).
15.
Reinstall the components removed in step 1.
16.
Connect a PGM Tester with SN 900 (or higher) software, and clear any stored DTCs. Make sure the MIL has gone off and stays off.
17.
Center-punch a completion mark above the second character (H) of the engine compartment VIN.
Disclaimer