Accord LX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
2.
Check the clearance between the wheel sensor harness and the inner side of the tire(s) or wheel(s), and perform the appropriate procedure.
-
If the wheel sensor harness is damaged, replace the sensor. Refer to page 19-69 of the 1998 Accord S/M.
-
If there is too much slack in the harness, go to Adjusting the Wire Harness.
-
If the mounting bracket is installed incorrectly, go to Reinstalling the Wire Harness Bracket.
Adjusting the Wire Harness
1.
Raise the vehicle on a hoist, and remove the wheel.