Accord LX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
1. Apply a force of 98 N (10 kgf, 22 lbf), and measure the deflection at the mid point (A) between the alternator and crankshaft pulley. If the belt is
worn or damaged, replace it. If the belt needs adjustment, go to step 2.
Deflection:
Used Belt: 7.0 - 9.0 mm (0.28 - 0.35 in.)
New Belt: 4.0 - 6.0 mm (0.15 - 0.24 in.)
Adjustment
2. Loosen the mounting bolt (B) and locknut (C).
3. Turn the adjusting bolt (D) to obtain the proper belt tension, then retighten the locknut and mounting bolt.
4. Recheck the belt tension.
5. If you installed a new belt, run the engine for five minutes, then readjust the belt to the used belt specification.
6. Check the power steering pump belt adjustment.
Alternator Belt Inspection and Adjustment
Special Tools Required
Belt Tension Gauge 07JGG-001010A
Belt Tension Gauge Method
Inspection
1. Attach the belt tension gauge to the belt and measure the tension. Follow the gauge manufacturer's instructions. If the belt is worn or damaged,
replace it. If the belt needs adjustment, go to step 2.
Tension:
Used Belt: 290 - 440 N (30 - 45 kgf, 66 - 99 lbf)