Accord LX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
24. Assemble pump rotor (A) to the pump cover (B).
25. Set the 10 vanes (C) in the grooves in the rotor. Make sure that the round ends (D) of the vanes are in contact with the sliding surface of the cam
ring.
26. Coat the new O-ring (A) with power steering fluid, and install it into the groove in the side plate (B).
27. Install the side plate on the cam ring (C) by aligning the roller set holes (D) in the side plate with the rollers (E).
28. Coat the new O-ring (A) with power steering fluid, and position it in the bottom of the pump housing (B).
29. Install the pump cover assembly (C) in the pump housing.