Accord LX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
8. Install the shift arm assembly in the reverse order of removal, and note these items.
-
During reassembly, grease all sliding parts.
-
Use only Super High Temp Urea Grease (P/N 08798-9002).
-
Apply liquid gasket (P/N 08718-0001) to the interlock bolt threads before reassembly.
-
Turn the shift lever boot so the hole is facing down.
-
Use liquid gasket (P/N 08718-0001).
-
Remove the dirty oil from the sealing surface.
-
Seal the entire circumference of the bolt holes to prevent oil leakage.
-
If 20 minutes have passed after applying liquid gasket, reapply it and assemble the housings. Allow it to cure at least 20 minutes after assembly
before filling the transmission with oil.