Accord LX Sedan V6-3.0L (2001)
Cruise Control Switch: Service and Repair
Set/Resume/Cancel Switch
Set/Resume/Cancel Switch Test/Replacement
1. Carefully remove the set/resume/cancel switch cover (A) by prying between the cover and the switch (B) in the sequence shown.
2. Remove the 2 screws (A), then remove the switch (B).
3. Check for continuity between the terminals in switch position according to the table.
-
If there is continuity and it matches the table, but switch failure is occurred on the cruise control unit input test, check and repair the wire
harness on the switch circuit.
-
If there is no continuity in one or both positions, replace the switch.
