Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
Hood Latch Release Cable: Service and Repair
Hood Opener Cable Replacement
1. Remove these items from the left side of the vehicle:
-
Splash guard (for some models)
-
Inner fender
2. Remove these items for the left side of the vehicle:
Coupe:
-
Door opening trim
-
Kick panel
Sedan:
-
Door opening trim
-
Kick panel
3. Disconnect the hood opener cable (A) from the hood latch (B) and hood release handle (C).
4. Using a clip remover, detach the clips (D E) from the body, then remove the hood opener cable from the vehicle. Take care not to bend the cable.
5. Install the cable in the reverse order of removal, and replace any damaged clips.